You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
544 lines
21 KiB
544 lines
21 KiB
/*
|
|
|
|
u8x8_d_ssd1306_128x64_noname.c
|
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
|
|
|
Copyright (c) 2016, olikraus@gmail.com
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
|
of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
|
materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
|
#include "u8x8.h"
|
|
|
|
|
|
|
|
/* more or less generic setup of all these small OLEDs */
|
|
static const uint8_t u8x8_d_ssd1306_128x64_noname_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_CA(0x0d5, 0x080), /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
|
|
U8X8_CA(0x0a8, 0x03f), /* multiplex ratio */
|
|
U8X8_CA(0x0d3, 0x000), /* display offset */
|
|
U8X8_C(0x040), /* set display start line to 0 */
|
|
U8X8_CA(0x08d, 0x014), /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable, SSD1306 only, should be removed for SH1106 */
|
|
U8X8_CA(0x020, 0x000), /* horizontal addressing mode */
|
|
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
|
// Flipmode
|
|
// U8X8_C(0x0a0), /* segment remap a0/a1*/
|
|
// U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
|
|
|
U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
|
|
|
|
U8X8_CA(0x081, 0x0cf), /* [2] set contrast control */
|
|
U8X8_CA(0x0d9, 0x0f1), /* [2] pre-charge period 0x022/f1*/
|
|
U8X8_CA(0x0db, 0x040), /* vcomh deselect level */
|
|
// if vcomh is 0, then this will give the biggest range for contrast control issue #98
|
|
// restored the old values for the noname constructor, because vcomh=0 will not work for all OLEDs, #116
|
|
|
|
U8X8_C(0x02e), /* Deactivate scroll */
|
|
U8X8_C(0x0a4), /* output ram to display */
|
|
U8X8_C(0x0a6), /* none inverted normal display mode */
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
/* this setup maximizes the brightness range, that can be set with setContrast() */
|
|
/* Drawback: VCOMH deselect level is set to 0, which das not work so good with all OLEDs, issue #116 */
|
|
static const uint8_t u8x8_d_ssd1306_128x64_vcomh0_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_CA(0x0d5, 0x080), /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
|
|
U8X8_CA(0x0a8, 0x03f), /* multiplex ratio */
|
|
U8X8_CA(0x0d3, 0x000), /* display offset */
|
|
U8X8_C(0x040), /* set display start line to 0 */
|
|
U8X8_CA(0x08d, 0x014), /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
|
|
U8X8_CA(0x020, 0x000), /* horizontal addressing mode */
|
|
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
|
// Flipmode
|
|
// U8X8_C(0x0a0), /* segment remap a0/a1*/
|
|
// U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
|
|
|
U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
|
|
U8X8_CA(0x081, 0x0ef), /* [2] set contrast control, */
|
|
U8X8_CA(0x0d9, 0x0a1), /* [2] pre-charge period 0x022/f1*/
|
|
U8X8_CA(0x0db, 0x000), /* vcomh deselect level 0x000 .. 0x070, low nibble always 0 */
|
|
// if vcomh is 0, then this will give the biggest range for contrast control issue #98
|
|
|
|
U8X8_C(0x02e), /* Deactivate scroll */
|
|
U8X8_C(0x0a4), /* output ram to display */
|
|
U8X8_C(0x0a6), /* none inverted normal display mode */
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
/* same as u8x8_d_ssd1306_128x64_noname_init_seq, but 0x0da bit 4 is set to 0 */
|
|
/* this will disable the alternative COM configuration */
|
|
static const uint8_t u8x8_d_ssd1306_128x64_alt0_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_CA(0x0d5, 0x080), /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
|
|
U8X8_CA(0x0a8, 0x03f), /* multiplex ratio */
|
|
U8X8_CA(0x0d3, 0x000), /* display offset */
|
|
U8X8_C(0x040), /* set display start line to 0 */
|
|
U8X8_CA(0x08d, 0x014), /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable, SSD1306 only, should be removed for SH1106 */
|
|
U8X8_CA(0x020, 0x000), /* horizontal addressing mode */
|
|
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
|
// Flipmode
|
|
// U8X8_C(0x0a0), /* segment remap a0/a1*/
|
|
// U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
|
|
|
U8X8_CA(0x0da, 0x002), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
|
|
|
|
U8X8_CA(0x081, 0x0cf), /* [2] set contrast control */
|
|
U8X8_CA(0x0d9, 0x0f1), /* [2] pre-charge period 0x022/f1*/
|
|
U8X8_CA(0x0db, 0x040), /* vcomh deselect level */
|
|
// if vcomh is 0, then this will give the biggest range for contrast control issue #98
|
|
// restored the old values for the noname constructor, because vcomh=0 will not work for all OLEDs, #116
|
|
|
|
U8X8_C(0x02e), /* Deactivate scroll */
|
|
U8X8_C(0x0a4), /* output ram to display */
|
|
U8X8_C(0x0a6), /* none inverted normal display mode */
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
|
|
/* issue 316: a special sh1106 setup, https://www.mikrocontroller.net/topic/431371?goto=5087807#5087807 */
|
|
static const uint8_t u8x8_d_sh1106_128x64_winstar_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
U8X8_C(0xae), // Display OFF/ON: off (POR = 0xae)
|
|
U8X8_C(0xa4), // Set Entire Display OFF/ON: off (POR = 0xa4)
|
|
U8X8_CA(0xd5, 0x50), // Divide Ratio/Oscillator FrequencyData Set: divide ratio = 1 (POR = 1), Oscillator Frequency = +/- 0% (POR = +/- 0%)
|
|
U8X8_CA(0xa8, 0x3f), // Multiplex Ratio Data Set: 64 (POR = 0x3f, 64)
|
|
U8X8_CA(0xd3, 0x00), // Display OffsetData Set: 0 (POR = 0x00)
|
|
U8X8_C(0x40), // Set Display Start Line: 0
|
|
U8X8_CA(0xad, 0x8b), // DC-DC ON/OFF Mode Set: Built-in DC-DC is used, Normal Display (POR = 0x8b)
|
|
U8X8_CA(0xd9, 0x22), // Dis-charge/Pre-charge PeriodData Set: pre-charge 2 DCLKs, dis-charge 2 DCLKs (POR = 0x22, pre-charge 2 DCLKs, dis-charge 2 DCLKs)
|
|
U8X8_CA(0xdb, 0x35), // VCOM Deselect LevelData Set: 0,770V (POR = 0x35, 0,770 V)
|
|
U8X8_C(0x32), // Set Pump voltage value: 8,0 V (POR = 0x32, 8,0 V)
|
|
U8X8_CA(0x81, 0xff), // Contrast Data Register Set: 255 (large) (POR = 0x80)
|
|
U8X8_C(0x0a6), // Set Normal/Reverse Display: normal (POR = 0xa6)
|
|
U8X8_CA(0x0da, 0x012), // com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5)
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1312_128x64_noname_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_CA(0x0d5, 0x080), /* clock divide ratio (0x00=1) and oscillator frequency (0x8) */
|
|
U8X8_CA(0x0a8, 0x03f), /* multiplex ratio */
|
|
U8X8_CA(0x0d3, 0x000), /* display offset */
|
|
U8X8_C(0x040), /* set display start line to 0 */
|
|
U8X8_CA(0x08d, 0x014), /* [2] charge pump setting (p62): 0x014 enable, 0x010 disable, SSD1306 only, should be removed for SH1106 */
|
|
U8X8_CA(0x020, 0x000), /* horizontal addressing mode */
|
|
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
|
|
|
U8X8_CA(0x0da, 0x012), /* com pin HW config, sequential com pin config (bit 4), disable left/right remap (bit 5) */
|
|
|
|
U8X8_CA(0x081, 0x0cf), /* [2] set contrast control */
|
|
U8X8_CA(0x0d9, 0x0f1), /* [2] pre-charge period 0x022/f1*/
|
|
U8X8_CA(0x0db, 0x040), /* vcomh deselect level */
|
|
// if vcomh is 0, then this will give the biggest range for contrast control issue #98
|
|
// restored the old values for the noname constructor, because vcomh=0 will not work for all OLEDs, #116
|
|
|
|
U8X8_C(0x02e), /* Deactivate scroll */
|
|
U8X8_C(0x0a4), /* output ram to display */
|
|
U8X8_C(0x0a6), /* none inverted normal display mode */
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
static const uint8_t u8x8_d_ssd1306_128x64_noname_powersave0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0af), /* display on */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1306_128x64_noname_powersave1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1306_128x64_noname_flip0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1306_128x64_noname_flip1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0a0), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1312_128x64_noname_flip0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0a1), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c0), /* c0: scan dir normal, c8: reverse */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1312_128x64_noname_flip1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0a0), /* segment remap a0/a1*/
|
|
U8X8_C(0x0c8), /* c0: scan dir normal, c8: reverse */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static uint8_t u8x8_d_ssd1306_sh1106_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t x, c;
|
|
uint8_t *ptr;
|
|
switch(msg)
|
|
{
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_128x64_noname_display_info);
|
|
break;
|
|
*/
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_init_seq);
|
|
break;
|
|
*/
|
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
|
if ( arg_int == 0 )
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_powersave0_seq);
|
|
else
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_powersave1_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
break;
|
|
#ifdef U8X8_WITH_SET_CONTRAST
|
|
case U8X8_MSG_DISPLAY_SET_CONTRAST:
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
u8x8_cad_SendCmd(u8x8, 0x081 );
|
|
u8x8_cad_SendArg(u8x8, arg_int ); /* ssd1306 has range from 0 to 255 */
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
break;
|
|
#endif
|
|
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
|
|
x *= 8;
|
|
x += u8x8->x_offset;
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x040 ); /* set line offset to 0 */
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x010 | (x>>4) );
|
|
u8x8_cad_SendArg(u8x8, 0x000 | ((x&15))); /* probably wrong, should be SendCmd */
|
|
u8x8_cad_SendArg(u8x8, 0x0b0 | (((u8x8_tile_t *)arg_ptr)->y_pos)); /* probably wrong, should be SendCmd */
|
|
|
|
|
|
do
|
|
{
|
|
c = ((u8x8_tile_t *)arg_ptr)->cnt;
|
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
|
|
u8x8_cad_SendData(u8x8, c*8, ptr); /* note: SendData can not handle more than 255 bytes */
|
|
/*
|
|
do
|
|
{
|
|
u8x8_cad_SendData(u8x8, 8, ptr);
|
|
ptr += 8;
|
|
c--;
|
|
} while( c > 0 );
|
|
*/
|
|
arg_int--;
|
|
} while( arg_int > 0 );
|
|
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
static const u8x8_display_info_t u8x8_ssd1306_128x64_noname_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 20,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 100, /* SSD1306: 3 us */
|
|
/* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */
|
|
/* sda_setup_time_ns = */ 50, /* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */
|
|
/* sck_pulse_width_ns = */ 50, /* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */
|
|
/* sck_clock_hz = */ 8000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
|
/* i2c_bus_clock_100kHz = */ 4,
|
|
/* data_setup_time_ns = */ 40,
|
|
/* write_pulse_width_ns = */ 150, /* SSD1306: cycle time is 300ns, so use 300/2 = 150 */
|
|
/* tile_width = */ 16,
|
|
/* tile_height = */ 8,
|
|
/* default_x_offset = */ 0,
|
|
/* flipmode_x_offset = */ 0,
|
|
/* pixel_width = */ 128,
|
|
/* pixel_height = */ 64
|
|
};
|
|
|
|
uint8_t u8x8_d_ssd1306_128x64_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
uint8_t u8x8_d_ssd1312_128x64_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1312_128x64_noname_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1312_128x64_noname_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
break;
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1312_128x64_noname_init_seq); /* update 27 mar 2022 */
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
uint8_t u8x8_d_ssd1306_128x64_vcomh0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_vcomh0_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
uint8_t u8x8_d_ssd1306_128x64_alt0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_alt0_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1306_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
|
|
static const u8x8_display_info_t u8x8_sh1106_128x64_noname_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 20,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 100, /* SSD1306: 3 us */
|
|
/* post_reset_wait_ms = */ 100, /* far east OLEDs need much longer setup time */
|
|
/* sda_setup_time_ns = */ 50, /* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */
|
|
/* sck_pulse_width_ns = */ 50, /* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */
|
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns, increased to 8MHz (issue 215) */
|
|
/* spi_mode = */ 0, /* issue 1901: changed mode from 3 to 0 */
|
|
/* i2c_bus_clock_100kHz = */ 4,
|
|
/* data_setup_time_ns = */ 40,
|
|
/* write_pulse_width_ns = */ 150, /* SSD1306: cycle time is 300ns, so use 300/2 = 150 */
|
|
/* tile_width = */ 16,
|
|
/* tile_height = */ 8,
|
|
/* default_x_offset = */ 2,
|
|
/* flipmode_x_offset = */ 2,
|
|
/* pixel_width = */ 128,
|
|
/* pixel_height = */ 64
|
|
};
|
|
|
|
uint8_t u8x8_d_sh1106_128x64_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
/* maybe use a better init sequence */
|
|
/* https://www.mikrocontroller.net/topic/431371 */
|
|
/* the new sequence is added in the winstar constructor (see below), this is kept untouched */
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1106_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
|
|
}
|
|
|
|
uint8_t u8x8_d_sh1106_128x64_vcomh0(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_vcomh0_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1106_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
|
|
}
|
|
|
|
uint8_t u8x8_d_sh1106_128x64_winstar(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( u8x8_d_ssd1306_sh1106_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
|
|
switch(msg)
|
|
{
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_sh1106_128x64_winstar_init_seq);
|
|
break;
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sh1106_128x64_noname_display_info);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
|
|
}
|
|
|
|
|