You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
457 lines
14 KiB
457 lines
14 KiB
/*
|
|
|
|
u8x8_d_uc1628.c
|
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
|
|
|
Copyright (c) 2017, olikraus@gmail.com
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
|
of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
|
materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
UC1628: Monochrome 163x256 driver
|
|
|
|
CAD: 011
|
|
|
|
*/
|
|
|
|
#include "u8x8.h"
|
|
|
|
static const uint8_t u8x8_d_uc1628_powersave0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_CA( 0x0c9, 0x0ad ), /* display enable */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_uc1628_powersave1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_CA( 0x0c9, 0x0ac ), /* display disable */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
static const uint8_t u8x8_d_uc1628_flip0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C( 0x0c4 ),
|
|
U8X8_END_TRANSFER(),
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_uc1628_flip1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C( 0x0c2 ),
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static uint8_t u8x8_d_uc1628_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t x, c;
|
|
uint8_t *ptr;
|
|
switch(msg)
|
|
{
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_st75256_256x128_display_info);
|
|
break;
|
|
*/
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_st75256_256x128_init_seq);
|
|
break;
|
|
*/
|
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
|
if ( arg_int == 0 )
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_powersave0_seq);
|
|
else
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_powersave1_seq);
|
|
|
|
break;
|
|
#ifdef U8X8_WITH_SET_CONTRAST
|
|
case U8X8_MSG_DISPLAY_SET_CONTRAST:
|
|
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x081 ); /* volume control */
|
|
u8x8_cad_SendArg(u8x8, 0 ); /* always 0 */
|
|
u8x8_cad_SendArg(u8x8, arg_int); /* 8 bit */
|
|
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
break;
|
|
#endif
|
|
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
|
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
|
|
x *= 8;
|
|
|
|
// TODO: u8x8->x_offset IS MISSING here
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x004 ); /* col */
|
|
u8x8_cad_SendArg(u8x8, x);
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x060 ); /* row */
|
|
u8x8_cad_SendArg(u8x8, (((u8x8_tile_t *)arg_ptr)->y_pos));
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x001 ); // write data
|
|
|
|
do
|
|
{
|
|
c = ((u8x8_tile_t *)arg_ptr)->cnt;
|
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
|
|
/* SendData can not handle more than 255 bytes, treat c > 31 correctly */
|
|
if ( c > 31 )
|
|
{
|
|
u8x8_cad_SendData(u8x8, 248, ptr); /* 31*8=248 */
|
|
ptr+=248;
|
|
c -= 31;
|
|
}
|
|
|
|
u8x8_cad_SendData(u8x8, c*8, ptr);
|
|
arg_int--;
|
|
} while( arg_int > 0 );
|
|
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*=============================================*/
|
|
/* 256x128, https://github.com/olikraus/u8g2/issues/2260 */
|
|
|
|
static const u8x8_display_info_t u8x8_uc1628_256x128_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 10,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 5,
|
|
/* post_reset_wait_ms = */ 5, /**/
|
|
/* sda_setup_time_ns = */ 25, /* */
|
|
/* sck_pulse_width_ns = */ 100, /* */
|
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
|
/* i2c_bus_clock_100kHz = */ 4, /* 400KHz */
|
|
/* data_setup_time_ns = */ 45,
|
|
/* write_pulse_width_ns = */ 125,
|
|
/* tile_width = */ 32,
|
|
/* tile_height = */ 16,
|
|
/* default_x_offset = */ 0, /* */
|
|
/* flipmode_x_offset = */ 0, /* */
|
|
/* pixel_width = */ 256,
|
|
/* pixel_height = */ 128
|
|
};
|
|
|
|
static const uint8_t u8x8_d_uc1628_256x128_init_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
U8X8_DLY(20),
|
|
|
|
U8X8_C( 0x010 ), /* Termp.: Reset default */
|
|
U8X8_C( 0x012 ), /* Termp.: Reset default */
|
|
U8X8_C( 0x014 ), /* Termp.: Reset default */
|
|
|
|
/* assign temperature independent framerate */
|
|
/* 0x00d = 81,9Hz (reset default) */
|
|
/* 0x000 = 40.0 Hz (min) */
|
|
/* 0x01f = 140.0 Hz (max) */
|
|
|
|
U8X8_CAA( 0x016, 0x000, 0x00d ), /* 1st arg: temp. point, 2nd arg: frame rate */
|
|
|
|
U8X8_CA( 0x040, 0x000 ), /* scroll line */
|
|
|
|
U8X8_C( 0x020 ), /* temp compensation */
|
|
U8X8_C( 0x02d ), /* charge pump control */
|
|
U8X8_C( 0x0eb ), /* LCD Bias: 0xe8=6, ... 0xeb=12 ... 0xed=14 */
|
|
|
|
U8X8_CAA( 0x081, 0x000, 0x048 ), /* Contrast, 1st arg is always 0 */
|
|
|
|
U8X8_CA( 0x0b8, 0x000 ), /* OTP control: Idle & Ignore */
|
|
|
|
U8X8_CA( 0x0f1, 0x07f ), /* set COM end */
|
|
U8X8_CA( 0x0f2, 0x000 ), /* set partial display start */
|
|
U8X8_CA( 0x0f3, 0x07f ), /* set partial display end */
|
|
|
|
U8X8_C( 0x088 ), /* auto increment control */
|
|
|
|
U8X8_C( 0x0c4 ), /* XY mirror in bit 1 & 2 */
|
|
|
|
U8X8_DLY(100),
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
uint8_t u8x8_d_uc1628_256x128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( u8x8_d_uc1628_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
|
|
{
|
|
u8x8_SetI2CAddress(u8x8, 0x070); /* lowest I2C adr of the UC1628 */
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1628_256x128_display_info);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_INIT )
|
|
{
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_256x128_init_seq);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
|
|
{
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*=============================================*/
|
|
/* 256x32, https://github.com/olikraus/u8g2/issues/2260 */
|
|
|
|
static const u8x8_display_info_t u8x8_uc1628_256x32_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 10,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 5,
|
|
/* post_reset_wait_ms = */ 5, /**/
|
|
/* sda_setup_time_ns = */ 25, /* */
|
|
/* sck_pulse_width_ns = */ 100, /* */
|
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
|
/* i2c_bus_clock_100kHz = */ 4, /* 400KHz */
|
|
/* data_setup_time_ns = */ 45,
|
|
/* write_pulse_width_ns = */ 125,
|
|
/* tile_width = */ 32,
|
|
/* tile_height = */ 4,
|
|
/* default_x_offset = */ 0, /* */
|
|
/* flipmode_x_offset = */ 0, /* */
|
|
/* pixel_width = */ 256,
|
|
/* pixel_height = */ 32
|
|
};
|
|
|
|
static const uint8_t u8x8_d_uc1628_256x32_init_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
U8X8_DLY(20),
|
|
|
|
U8X8_C( 0x010 ), /* Termp.: Reset default */
|
|
U8X8_C( 0x012 ), /* Termp.: Reset default */
|
|
U8X8_C( 0x014 ), /* Termp.: Reset default */
|
|
|
|
/* assign temperature independent framerate */
|
|
/* 0x00d = 81,9Hz (reset default) */
|
|
/* 0x000 = 40.0 Hz (min) */
|
|
/* 0x01f = 140.0 Hz (max) */
|
|
|
|
U8X8_CAA( 0x016, 0x000, 0x00d ), /* 1st arg: temp. point, 2nd arg: frame rate */
|
|
|
|
U8X8_CA( 0x040, 0x000 ), /* scroll line */
|
|
|
|
U8X8_C( 0x020 ), /* temp compensation */
|
|
U8X8_C( 0x02d ), /* charge pump control */
|
|
U8X8_C( 0x0e8 ), /* LCD Bias: 0xe8=6, ... 0xeb=12 ... 0xed=14 */
|
|
|
|
U8X8_CAA( 0x081, 0x000, 0x048 ), /* Contrast, 1st arg is always 0 */
|
|
|
|
U8X8_CA( 0x0b8, 0x000 ), /* OTP control: Idle & Ignore */
|
|
|
|
U8X8_CA( 0x0f1, 0x01f ), /* set COM end */
|
|
U8X8_CA( 0x0f2, 0x000 ), /* set partial display start */
|
|
U8X8_CA( 0x0f3, 0x07f ), /* set partial display end */
|
|
|
|
U8X8_C( 0x088 ), /* auto increment control */
|
|
|
|
U8X8_C( 0x0c4 ), /* XY mirror in bit 1 & 2 */
|
|
|
|
U8X8_DLY(100),
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
uint8_t u8x8_d_uc1628_256x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( u8x8_d_uc1628_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
|
|
{
|
|
u8x8_SetI2CAddress(u8x8, 0x070); /* lowest I2C adr of the UC1628 */
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1628_256x32_display_info);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_INIT )
|
|
{
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_256x32_init_seq);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
|
|
{
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*=============================================*/
|
|
/* 128x64, https://github.com/olikraus/u8g2/issues/2260
|
|
|
|
2 Oct 2023: Probably the LCD Bias is wrong, it should be reduced, maybe 0xea or so
|
|
Moreover the COM end should be halfed (0x03f) --> Done, but not tested
|
|
|
|
*/
|
|
|
|
static const u8x8_display_info_t u8x8_uc1628_128x64_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 10,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 5,
|
|
/* post_reset_wait_ms = */ 5, /**/
|
|
/* sda_setup_time_ns = */ 25, /* */
|
|
/* sck_pulse_width_ns = */ 100, /* */
|
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
|
/* i2c_bus_clock_100kHz = */ 4, /* 400KHz */
|
|
/* data_setup_time_ns = */ 45,
|
|
/* write_pulse_width_ns = */ 125,
|
|
/* tile_width = */ 16,
|
|
/* tile_height = */ 8,
|
|
/* default_x_offset = */ 0, /* */
|
|
/* flipmode_x_offset = */ 0, /* */
|
|
/* pixel_width = */ 128,
|
|
/* pixel_height = */ 64
|
|
};
|
|
|
|
static const uint8_t u8x8_d_uc1628_128x64_init_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
U8X8_DLY(20),
|
|
|
|
U8X8_C( 0x010 ), /* Termp.: Reset default */
|
|
U8X8_C( 0x012 ), /* Termp.: Reset default */
|
|
U8X8_C( 0x014 ), /* Termp.: Reset default */
|
|
|
|
/* assign temperature independent framerate */
|
|
/* 0x00d = 81,9Hz (reset default) */
|
|
/* 0x000 = 40.0 Hz (min) */
|
|
/* 0x01f = 140.0 Hz (max) */
|
|
|
|
U8X8_CAA( 0x016, 0x000, 0x00d ), /* 1st arg: temp. point, 2nd arg: frame rate */
|
|
|
|
U8X8_CA( 0x040, 0x000 ), /* scroll line */
|
|
|
|
U8X8_C( 0x020 ), /* temp compensation */
|
|
U8X8_C( 0x02d ), /* charge pump control */
|
|
U8X8_C( 0x0eb ), /* LCD Bias: 0xe8=6, ... 0xeb=12 ... 0xed=14 */
|
|
|
|
U8X8_CAA( 0x081, 0x000, 0x048 ), /* Contrast, 1st arg is always 0 */
|
|
|
|
U8X8_CA( 0x0b8, 0x000 ), /* OTP control: Idle & Ignore */
|
|
|
|
U8X8_CA( 0x0f1, 0x03f ), /* set COM end */
|
|
U8X8_CA( 0x0f2, 0x000 ), /* set partial display start */
|
|
U8X8_CA( 0x0f3, 0x07f ), /* set partial display end */
|
|
|
|
U8X8_C( 0x088 ), /* auto increment control */
|
|
|
|
U8X8_C( 0x0c4 ), /* XY mirror in bit 1 & 2 */
|
|
|
|
U8X8_DLY(100),
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
uint8_t u8x8_d_uc1628_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( u8x8_d_uc1628_generic(u8x8, msg, arg_int, arg_ptr) != 0 )
|
|
return 1;
|
|
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
|
|
{
|
|
u8x8_SetI2CAddress(u8x8, 0x070); /* lowest I2C adr of the UC1628 */
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_uc1628_128x64_display_info);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_INIT )
|
|
{
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_128x64_init_seq);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
|
|
{
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_uc1628_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
|