You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
435 lines
16 KiB
435 lines
16 KiB
/*
|
|
|
|
u8x8_d_ssd1325.c
|
|
|
|
Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
|
|
|
|
Copyright (c) 2016, olikraus@gmail.com
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright notice, this list
|
|
of conditions and the following disclaimer.
|
|
|
|
* Redistributions in binary form must reproduce the above copyright notice, this
|
|
list of conditions and the following disclaimer in the documentation and/or other
|
|
materials provided with the distribution.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
|
|
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
|
|
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
|
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
SSD1325:
|
|
128 x 80, 16 Gray Scale Dot Matrix
|
|
|
|
SSD0323: Identical to SSD1325, issue 720
|
|
|
|
|
|
*/
|
|
|
|
|
|
#include "u8x8.h"
|
|
|
|
|
|
|
|
static const uint8_t u8x8_d_ssd1325_128x64_nhd_powersave0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0af), /* display on */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1325_128x64_nhd_powersave1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1325_128x64_nhd_flip0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_CA(0x0a0, 0x052), /* remap */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd1325_128x64_nhd_flip1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_CA(0x0a0, 0x041), /* remap */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
/*
|
|
input:
|
|
one tile (8 Bytes)
|
|
output:
|
|
Tile for SSD1325 (32 Bytes)
|
|
*/
|
|
|
|
static uint8_t u8x8_ssd1325_8to32_dest_buf[32];
|
|
|
|
static uint8_t *u8x8_ssd1325_8to32(U8X8_UNUSED u8x8_t *u8x8, uint8_t *ptr)
|
|
{
|
|
uint8_t v;
|
|
uint8_t a,b;
|
|
uint8_t i, j;
|
|
uint8_t *dest;
|
|
|
|
for( j = 0; j < 4; j++ )
|
|
{
|
|
dest = u8x8_ssd1325_8to32_dest_buf;
|
|
dest += j;
|
|
a =*ptr;
|
|
ptr++;
|
|
b = *ptr;
|
|
ptr++;
|
|
for( i = 0; i < 8; i++ )
|
|
{
|
|
v = 0;
|
|
if ( a&1 ) v |= 0xf0;
|
|
if ( b&1 ) v |= 0x0f;
|
|
*dest = v;
|
|
dest+=4;
|
|
a >>= 1;
|
|
b >>= 1;
|
|
}
|
|
}
|
|
|
|
return u8x8_ssd1325_8to32_dest_buf;
|
|
}
|
|
|
|
|
|
/*===================================================================*/
|
|
|
|
static uint8_t u8x8_d_ssd1325_128x64_generic(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
uint8_t x, y, c;
|
|
uint8_t *ptr;
|
|
switch(msg)
|
|
{
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_SETUP_MEMORY:
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd1325_128x64_nhd_display_info);
|
|
break;
|
|
*/
|
|
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_INIT:
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_init_seq);
|
|
break;
|
|
*/
|
|
case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
|
|
if ( arg_int == 0 )
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_powersave0_seq);
|
|
else
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_powersave1_seq);
|
|
break;
|
|
|
|
/* handled by the calling function
|
|
case U8X8_MSG_DISPLAY_SET_FLIP_MODE:
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
break;
|
|
*/
|
|
#ifdef U8X8_WITH_SET_CONTRAST
|
|
case U8X8_MSG_DISPLAY_SET_CONTRAST:
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
u8x8_cad_SendCmd(u8x8, 0x081 );
|
|
u8x8_cad_SendArg(u8x8, arg_int ); /* ssd1325 has range from 0 to 255 */
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
break;
|
|
#endif
|
|
case U8X8_MSG_DISPLAY_DRAW_TILE:
|
|
u8x8_cad_StartTransfer(u8x8);
|
|
x = ((u8x8_tile_t *)arg_ptr)->x_pos;
|
|
x *= 4;
|
|
|
|
y = (((u8x8_tile_t *)arg_ptr)->y_pos);
|
|
y *= 8;
|
|
y += u8x8->x_offset; /* x_offset is used as y offset for the SSD1325 */
|
|
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0x075 ); /* set row address */
|
|
u8x8_cad_SendArg(u8x8, y);
|
|
u8x8_cad_SendArg(u8x8, y+7);
|
|
|
|
do
|
|
{
|
|
c = ((u8x8_tile_t *)arg_ptr)->cnt;
|
|
ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
|
|
|
|
do
|
|
{
|
|
if ( ptr[0] | ptr[1] | ptr[2] | ptr[3] | ptr[4] | ptr[5] | ptr[6] | ptr[7] )
|
|
{
|
|
/* draw the tile if pattern is not zero for all bytes */
|
|
u8x8_cad_SendCmd(u8x8, 0x015 ); /* set column address */
|
|
u8x8_cad_SendArg(u8x8, x ); /* start */
|
|
u8x8_cad_SendArg(u8x8, x+3 ); /* end */
|
|
|
|
|
|
|
|
u8x8_cad_SendData(u8x8, 32, u8x8_ssd1325_8to32(u8x8, ptr));
|
|
}
|
|
else
|
|
{
|
|
/* tile is empty, use the graphics acceleration command */
|
|
u8x8_cad_SendCmd(u8x8, 0x024 ); // draw rectangle
|
|
u8x8_cad_SendArg(u8x8, x );
|
|
u8x8_cad_SendArg(u8x8, y );
|
|
u8x8_cad_SendArg(u8x8, x+3 );
|
|
u8x8_cad_SendArg(u8x8, y+7 );
|
|
u8x8_cad_SendArg(u8x8, 0 ); // clear
|
|
}
|
|
ptr += 8;
|
|
x += 4;
|
|
c--;
|
|
} while( c > 0 );
|
|
|
|
//x += 4;
|
|
arg_int--;
|
|
} while( arg_int > 0 );
|
|
|
|
u8x8_cad_SendCmd(u8x8, 0xe3); // no-op needs to be sent after last byte before cs is toggled.
|
|
|
|
u8x8_cad_EndTransfer(u8x8);
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/*===================================================================*/
|
|
|
|
/* http://www.newhavendisplay.com/app_notes/OLED_2_7_12864.txt */
|
|
static const uint8_t u8x8_d_ssd1325_128x64_nhd_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
|
|
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_CA(0x0b3, 0x091), /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
|
|
U8X8_CA(0x0a8, 0x03f), /* multiplex ratio: 0x03f * 1/64 duty */
|
|
U8X8_CA(0x0a2, 0x04c), /* display offset, shift mapping ram counter */
|
|
U8X8_CA(0x0a1, 0x000), /* display start line */
|
|
U8X8_CA(0x0ad, 0x002), /* master configuration: disable embedded DC-DC, enable internal VCOMH */
|
|
U8X8_CA(0x0a0, 0x052), /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
|
|
U8X8_C(0x086), /* full current range (0x084, 0x085, 0x086) */
|
|
U8X8_C(0x0b8), /* set gray scale table */
|
|
U8X8_A(0x001), /* */
|
|
U8X8_A(0x011), /* */
|
|
U8X8_A(0x022), /* */
|
|
U8X8_A(0x032), /* */
|
|
U8X8_A(0x043), /* */
|
|
U8X8_A(0x054), /* */
|
|
U8X8_A(0x065), /* */
|
|
U8X8_A(0x076), /* */
|
|
|
|
U8X8_CA(0x081, 0x070), /* contrast, brightness, 0..128, Newhaven: 0x040 */
|
|
U8X8_CA(0x0b2, 0x051), /* frame frequency (row period) */
|
|
U8X8_CA(0x0b1, 0x055), /* phase length */
|
|
U8X8_CA(0x0bc, 0x010), /* pre-charge voltage level */
|
|
U8X8_CA(0x0b4, 0x002), /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
|
U8X8_CA(0x0b0, 0x028), /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
|
U8X8_CA(0x0be, 0x01c), /* VCOMH voltage */
|
|
U8X8_CA(0x0bf, 0x002|0x00d), /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
|
U8X8_C(0x0a4), /* normal display mode */
|
|
|
|
U8X8_CA(0x023, 0x003), /* graphics accelleration: fill pixel */
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const u8x8_display_info_t u8x8_nhd_ssd1325_128x64_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 20,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 100,
|
|
/* post_reset_wait_ms = */ 100, /**/
|
|
/* sda_setup_time_ns = */ 100, /* SSD1325 */
|
|
/* sck_pulse_width_ns = */ 100, /* SSD1325 */
|
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
|
/* i2c_bus_clock_100kHz = */ 4,
|
|
/* data_setup_time_ns = */ 40,
|
|
/* write_pulse_width_ns = */ 60, /* SSD1325 */
|
|
/* tile_width = */ 16,
|
|
/* tile_height = */ 8,
|
|
/* default_x_offset = */ 0, /* x_offset is used as y offset for the SSD1325 */
|
|
/* flipmode_x_offset = */ 8, /* x_offset is used as y offset for the SSD1325 */
|
|
/* pixel_width = */ 128,
|
|
/* pixel_height = */ 64
|
|
};
|
|
|
|
uint8_t u8x8_d_ssd1325_nhd_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
|
|
{
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_nhd_ssd1325_128x64_display_info);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_INIT )
|
|
{
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_init_seq);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
|
|
{
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1325_128x64_nhd_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
return 1;
|
|
}
|
|
return u8x8_d_ssd1325_128x64_generic(u8x8, msg, arg_int, arg_ptr);
|
|
}
|
|
|
|
/*===================================================================*/
|
|
/* OSRAM Pictiva 128x64 OLED */
|
|
/* https://github.com/olikraus/u8g2/issues/720 */
|
|
|
|
static const uint8_t u8x8_d_ssd0323_os128064_init_seq[] = {
|
|
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_C(0x0ae), /* display off */
|
|
U8X8_CA(0x0b3, 0x091), /* set display clock divide ratio/oscillator frequency (set clock as 135 frames/sec) */
|
|
U8X8_CA(0x0a8, 0x03f), /* multiplex ratio: 0x03f * 1/64 duty */
|
|
U8X8_CA(0x0a2, 0x040), /* display offset, shift mapping ram counter */
|
|
U8X8_CA(0x0a1, 0x000), /* display start line */
|
|
U8X8_CA(0x0ad, 0x002), /* master configuration: disable embedded DC-DC, enable internal VCOMH */
|
|
U8X8_CA(0x0a0, 0x052), /* remap configuration, horizontal address increment (bit 2 = 0), enable nibble remap (upper nibble is left, bit 1 = 1) */
|
|
U8X8_C(0x086), /* full current range (0x084, 0x085, 0x086) */
|
|
U8X8_C(0x0b8), /* set gray scale table */
|
|
U8X8_A(0x001), /* */
|
|
U8X8_A(0x011), /* */
|
|
U8X8_A(0x022), /* */
|
|
U8X8_A(0x032), /* */
|
|
U8X8_A(0x043), /* */
|
|
U8X8_A(0x054), /* */
|
|
U8X8_A(0x065), /* */
|
|
U8X8_A(0x076), /* */
|
|
|
|
U8X8_CA(0x081, 0x070), /* contrast, brightness, 0..128, Newhaven: 0x040 */
|
|
U8X8_CA(0x0b2, 0x051), /* frame frequency (row period) */
|
|
U8X8_CA(0x0b1, 0x055), /* phase length */
|
|
U8X8_CA(0x0bc, 0x010), /* pre-charge voltage level */
|
|
U8X8_CA(0x0b4, 0x002), /* set pre-charge compensation level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
|
U8X8_CA(0x0b0, 0x028), /* enable pre-charge compensation (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
|
U8X8_CA(0x0be, 0x01c), /* VCOMH voltage */
|
|
U8X8_CA(0x0bf, 0x002|0x00d), /* VSL voltage level (not documented in the SDD1325 datasheet, but used in the NHD init seq.) */
|
|
U8X8_C(0x0a4), /* normal display mode */
|
|
|
|
U8X8_CA(0x023, 0x003), /* graphics accelleration: fill pixel */
|
|
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd0323_os128064_flip0_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_CA(0x0a0, 0x052), /* remap */
|
|
U8X8_CA(0x0a2, 0x040), /* display offset, shift mapping ram counter */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
static const uint8_t u8x8_d_ssd0323_os128064_flip1_seq[] = {
|
|
U8X8_START_TRANSFER(), /* enable chip, delay is part of the transfer start */
|
|
U8X8_CA(0x0a0, 0x041), /* remap */
|
|
U8X8_CA(0x0a2, 0x050), /* display offset, shift mapping ram counter */
|
|
U8X8_END_TRANSFER(), /* disable chip */
|
|
U8X8_END() /* end of sequence */
|
|
};
|
|
|
|
|
|
static const u8x8_display_info_t u8x8_ssd0323_os128064_display_info =
|
|
{
|
|
/* chip_enable_level = */ 0,
|
|
/* chip_disable_level = */ 1,
|
|
|
|
/* post_chip_enable_wait_ns = */ 20,
|
|
/* pre_chip_disable_wait_ns = */ 10,
|
|
/* reset_pulse_width_ms = */ 100,
|
|
/* post_reset_wait_ms = */ 100, /**/
|
|
/* sda_setup_time_ns = */ 100, /* SSD1325 */
|
|
/* sck_pulse_width_ns = */ 100, /* SSD1325 */
|
|
/* sck_clock_hz = */ 4000000UL, /* since Arduino 1.6.0, the SPI bus speed in Hz. Should be 1000000000/sck_pulse_width_ns */
|
|
/* spi_mode = */ 0, /* active high, rising edge */
|
|
/* i2c_bus_clock_100kHz = */ 4,
|
|
/* data_setup_time_ns = */ 40,
|
|
/* write_pulse_width_ns = */ 60, /* SSD1325 */
|
|
/* tile_width = */ 16,
|
|
/* tile_height = */ 8,
|
|
/* default_x_offset = */ 0, /* x_offset is used as y offset for the SSD1325 */
|
|
/* flipmode_x_offset = */ 0, /* x_offset is used as y offset for the SSD1325 */
|
|
/* pixel_width = */ 128,
|
|
/* pixel_height = */ 64
|
|
};
|
|
|
|
uint8_t u8x8_d_ssd0323_os128064(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
|
|
{
|
|
if ( msg == U8X8_MSG_DISPLAY_SETUP_MEMORY )
|
|
{
|
|
u8x8_d_helper_display_setup_memory(u8x8, &u8x8_ssd0323_os128064_display_info);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_INIT )
|
|
{
|
|
u8x8_d_helper_display_init(u8x8);
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd0323_os128064_init_seq);
|
|
return 1;
|
|
}
|
|
else if ( msg == U8X8_MSG_DISPLAY_SET_FLIP_MODE )
|
|
{
|
|
if ( arg_int == 0 )
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd0323_os128064_flip0_seq);
|
|
u8x8->x_offset = u8x8->display_info->default_x_offset;
|
|
}
|
|
else
|
|
{
|
|
u8x8_cad_SendSequence(u8x8, u8x8_d_ssd0323_os128064_flip1_seq);
|
|
u8x8->x_offset = u8x8->display_info->flipmode_x_offset;
|
|
}
|
|
return 1;
|
|
}
|
|
return u8x8_d_ssd1325_128x64_generic(u8x8, msg, arg_int, arg_ptr);
|
|
}
|
|
|
|
|
|
|
|
|